Generated by EAGLE CAM Processor 6.3.0

Drill Station Info File: C:/Users/nebarnix/Documents/eagle/RC Controller V1.1/rc_cnt_V1.dri

 Date              : 6/19/2014 11:18:23 PM
 Drills            : generated
 Device            : Excellon drill station

Parameter settings:

 Tolerance Drill + :  0.00 %
 Tolerance Drill - :  0.00 %
 Rotate            : yes
 Mirror            : yes
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch
 Layers            : Drills Holes

Drill File Info:

 Data Mode         : Absolute
 Units             : 1/10000 Inch

Drills used:

 Code  Size       used

 T01   0.0200inch     3
 T02   0.0300inch    18
 T03   0.0315inch    12
 T04   0.0354inch     4
 T05   0.0400inch    92
 T06   0.1100inch    10

Total number of drills: 139

Plotfiles:

 C:/Users/nebarnix/Documents/eagle/RC Controller V1.1/rc_cnt_V1.drd