Generated by EAGLE CAM Processor 6.3.0

Drill Station Info File: C:/Users/nebarnix/Documents/eagle/RF AMP 433 Flight/RF_AMP_433 Ground/RF_AMP_433.dri

 Date              : 6/23/2014 8:52:57 AM
 Drills            : generated
 Device            : Excellon drill station

Parameter settings:

 Tolerance Drill + :  0.00 %
 Tolerance Drill - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : no
 Auto fit          : no
 OffsetX           : 0inch
 OffsetY           : 0inch
 Layers            : Drills Holes

Drill File Info:

 Data Mode         : Absolute
 Units             : 1/10000 Inch

Drills used:

 Code  Size       used

 T01   0.0120inch   128
 T02   0.0200inch     1
 T03   0.0236inch     1
 T04   0.0250inch     1
 T05   0.0400inch    12
 T06   0.1181inch     4

Total number of drills: 147

Plotfiles:

 C:/Users/nebarnix/Documents/eagle/RF AMP 433 Flight/RF_AMP_433 Ground/RF_AMP_433.TXT